Safety Instructions; Package Contents - Renkforce i-Moon Bedienungsanleitung

G Operating instructions
i-Moon LED Effect Spotlight
Item no. 1290261
Intended use
The LED effect spotlight generates LED lighting effects and is used in the private sec-
tor on dance floors, in party rooms etc.
This product is only approved for the connection to 90-230 V/ 50/60 Hz AC via an
earthed mains socket. Do not use any other power supply.
The product may only be used in enclosed indoor locations. Outdoor use is not al-
lowed. Do not expose to moisture, under any circumstances.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
Read the operating instructions carefully and keep them for later reference.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• LED effect spotlight
• Operating instructions
Features
• 46 bright LEDs generate light effects in 3 colours
• Variable speed effect
• Sound-to-light mode with variable sensitivity
• Mounting bracket for ceiling or wall mount
Explanation of symbols
This symbol points to specific risks associated with handling, function and
use.
A triangle containing a lightning symbol indicates a health hazard, e.g., elec-
tric shock. The device contains no parts that should be serviced by the user.
Therefore, do not open the device.
This symbol on the device indicates that the user should read these oper-
ating instructions prior to putting the device into operation and follow the
instructions when using the product.
...m This symbol indicates the minimum distance to the illuminated surfaces.
The symbol with the house is used to inform the user that the device may
only be operated in enclosed rooms.
The "arrow" symbol points to special tips and operating information.
Safety instructions
F irst, read the complete operating instructions carefully, as they contain
important information about the proper operation.
D amage due to not following these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
W e do not assume any liability for material and personal damage caused
by improper use or non-compliance with the safety instructions! In such
cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• The product is designed in compliance with safety class I and must only
be used with an earthed wall socket connected to the public electric grid.
• Do not look straight into the light rays during operation. Temporarily, the
light beams can lead to visual defects. Moreover, they may trigger epilep-
tic seizures in vulnerable persons. Of course, this applies particularly to
epileptics.
• Never touch the mains plug with wet or damp hands. There is danger of a
life-threatening electric shock!
• The mains plug must be pulled out of the mains socket to completely dis-
connect the device from the mains.
• Devices that operate on the mains voltage must be kept out of the reach
of children. For this reason, be particularly careful when using the device
in the presence of children. They may try to stick objects into the device,
through openings in the housing. There is a life-threatening electric shock
hazard.
• Check the device for damage frequently. Do not touch the spotlight or the
connecting cable if they show signs of damage. First, switch off the ap-
propriate mains socket (e.g. via the respective circuit-breaker) and then
carefully pull the mains plug from the socket. Do not use the product after-
wards, but take it to a specialist workshop.
• Never place vessels or containers containing liquids, such as glasses,
buckets, vases or plants, on the device or in the direct vicinity of the de-
vice. Liquids may seep into the casing and thus impair the electrical safety
of the device. Furthermore, there is a significant risk of fire or of a lethal
electric shock! If this is the case, de-energise the appropriate socket (e.g.
switch off circuit breaker) before removing the plug-in mains unit from the
socket. The product must no longer be used after that; take it to a special-
ist workshop.
• Do not expose the device to high temperatures, dripping or sprayed water,
strong vibrations or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or near the light
effect spotlight.
• Consult an expert, if you are still in doubt how the product functions, or
regarding safety or connection issues.
• Do not leave packaging materials unattended. They may become a dan-
gerous plaything for children.
• Never leave the device on unattended.
• Do not use the device in a tropical climate.
• Also observe any further safety instructions in the individual chapters of
these operating instructions.
• If you are unsure about how to connect the product properly, or should
you have any questions that are not answered in these operating instruc-
tions, please contact our technical service or consult a professional.