Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Safety Instructions; Description Of The Features - Renkforce YTSL-06 Mini Laser Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

G Operating instructions
YTSL-06 Mini Laser
Item no. 1401886
Intended use
The laser is intended for generating laser lighting effects and is operated by the built-
in controller.
This product may be operated only with the enclosed power supply unit.
The safety regulations and standards for laser operation must be complied with at all
times.
The product may be used only in enclosed indoor locations, never outdoors. Contact
with moisture, for example in bathrooms, must be avoided.
Any other use than that described above is not permitted and involves additional risks,
such as injuries to the eyes, short circuits and fire.
No part of the product may be modified or rebuilt, and the housing must not be opened.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Contents
• Laser
• Power adaptor
• Tripod
• Operating instructions
Explanation of symbols, inscriptions
This symbol indicates specific risks associated with handling, function and
use.
Safety instructions
R ead the complete operating manual carefully before using the product, as
it contains important information about the correct installation and opera-
tion.
T he warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any re-
sulting damage!
W e shall not accept liability for damage to property or personal injury
caused by incorrect handling or non-compliance with the safety instruc-
tions! The warranty will be void in such cases!
• This product may be assembled, commissioned and operated only by
suitably qualified professionals and only in compliance with the require-
ments stated in this operating manual.
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• Use only the supplied mains adapter as a power source.
• Connect the wall plug transformer only to a normal mains socket connec-
ted to the public supply. Before plugging in the power adapter, check whe-
ther the voltage stated on the power adapter complies with the voltage of
your electricity supplier.
• Power adapters must never be plugged in or disconnected with wet
hands.
• Never unplug the power packs from the mains socket by pulling on the
cable; always use the grips intended for this purpose.
• For safety reasons, always disconnect the power unit from the mains so-
cket during thunderstorms.
• Adjustments or maintenance should only be carried out by trained profes-
sionals who are aware of the dangers. Improperly executed adjustments
might result in dangerous laser radiation.
• When operating the laser equipment, always make sure that the laser
beam is directed so that no one is in the projection area and that uninten-
tional reflected beams (e.g., from reflective objects) cannot be directed
into areas where people are present.
• Laser radiation can be dangerous if the laser beam or its reflection enters
unprotected eyes. Therefore, before using the laser equipment, familiari-
se yourself with the statutory regulations and instructions for operating
such a laser device.
• Never look into the laser beam and never point it at people or animals.
Laser radiation may result in injuries to the eyes or skin.
• Do not point the laser beam at mirrors or other reflective surfaces. The
uncontrolled, reflected beam may strike people or animals.
• Only operate the laser in an attended area.
• If possible, restrict the range of radiation by using screens or partitions.
• Mark the range of the laser by using barriers or by using warning signs.
• Wherever possible, direct the laser in such a way that it does not cross
eye level.
• Caution: if operation settings or procedures other than those described
here in these instructions are used, it could result in exposure to dange-
rous radiation.
• This product is provided with a Class 2 Laser. Laser signs in different lan-
guages are included in the package. If the sign on the laser is not written
in the language of your country, please affix the appropriate sign to the
laser.
• Never look directly into the laser beam when the device is in operation.
The intense light rays could temporarily impair your eyesight. Moreover,
they may trigger epileptic seizures in vulnerable persons. This applies in
particular to epileptics.
• The device is not a toy. Children and adolescents cannot judge the dan-
gers of electrical devices and lasers.
• Inspect the laser unit for damage from time to time. Should the laser unit
or the power adapter show any damage, disconnect them from the power
supply (unplug the power adapter). Do not use the product afterwards, but
take it to a specialist workshop.
• Never pour liquids over electrical devices and never place objects filled
with liquid on top of them (e. g. vases). You run the risk of causing a fire or
a fatal electric shock. If liquids enter the device, immediately disconnect
it from the power supply, unplug the power supply unit from the mains and
consult an expert.
• Do not expose the device to high temperatures, dripping or sprayed water,
strong vibrations or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or close to the
device.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Do not leave the device in operation when it is unattended. For safety re-
asons, unplug from the mains socket after each operation.
• Do not use the device in a tropical climate.
• If in doubt about how to connect the product correctly, or should any
questions arise that are not answered in these operating instructions, ple-
ase contact our technical service or another specialist.
• Also observe any further safety instructions in the individual sections of
this operating guide.
Description of the features
• Producing a starry sky by means of the laser
• Large radiation area
• Green and red laser effect
• Automatic and sound-to-light mode
• Installation on a stand or mounting bracket

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1401886

Inhaltsverzeichnis