Title Search In Album Directory; Id3 Text Recall; Programming Of Cd/Mp3 Title Sequences - Renkforce MS-11425 Bedienungsanleitung

Title Search in Album Directory:

1. Press the FIND button (30) twice in order to switch to album/directory search mode. The looking glass
symbol / ALBUM appears in the display.
2. Using the IGG DOWN/REW or UP/FF button DDI (3) select the desired album.
3. Press and hold the IGG DOWN/REW or UP/FF button DDI (3) until the first title of the album appears
in the display. Using the IGG DOWN/REW or UP/FF button DDI (3) you can now select the desired
track.
4. Start playback of the track with the PLAY button (5).
Pressing the STOP button (4) whilst in search mode switches back into normal CD
mode.

ID3 Text Recall

Some MP3 files contain ID3 tag information, e.g. track name, artist etc.
1. Begin playback of the MP3-CD.
2. Press and hold the FIND (30) button on the remote control for 2 seconds in order to set the device ID3
text mode. Where corresponding information is contained on the CD (e.g. track name etc.), this will
run across the display.
3. Press and hold the FIND (30) button on the remote control for 2 seconds in order to return to standard
display mode (time, title number etc.).
Programming of CD/MP3-CD Title Sequences
1. Press the MEM key (11) in STOP mode.
2. MP3-CD: Using the IGG DOWN/REW or UP/FF button DDI (3) select the desired ALBUM and con-
firm with the MEM (11) button.
3. Using the IGG DOWN/REW or UP/FF button DDI (3) select the desired title and confirm with the
MEM (11) button.
4. Repeat steps 2 - 3 until all titles are saved. You can save up to a maximum of 64 tracks.
5. Playback in the required order is commenced by pressing the button PLAY (5).
After playback is stopped, the programme can be recalled by pressing MEM (11) and
then the PLAY (5) button. Opening the CD tray or switching the device off deletes the
saved playback order.
Pressing the STOP (4) button in the middle of programming deletes the order pro-
grammed.
43