Title Search; Album Name Search; Title Search In Album Directory; Id3 Text Recall - Renkforce MS-1239 Bedienungsanleitung

Track search:
1. Press the FIND button (30) to switch to track search mode. The looking glass symbol appears in the
display.
2. Using the IGG SKIP buttons DDI (3) you can then select the first letters of the name of the track. All
tracks beginning with these letter will then be listed.
3. Where several tracks are stored, the name of each beginning with these letters, press the SKIP button
IGG oor DDI (3), until the looking glass symbol stops flashing. Using the IGG SKIP buttons DDI (3)
you can switch between all entries, e.g. A-APPLE, A-ANGEL etc..
4. Press the PLAY (5) button. The track selected will be played.

Album Name Search:

1. Press the FIND button (30) twice in order to switch to album search mode. The looking glass symbol /
ALBUM appears in the display.
2. Using the IGG SKIP buttons DDI (3) you can then select the required album and start playback by
pressing the PLAY (5) button.
The word ROOT will appear, when the CD contains no album or when the CD contains
individual tracks not sorted into an album.

Title Search in Album Directory:

1. Press the FIND button (30) twice in order to switch to album/directory search mode. The looking glass
symbol / ALBUM appears in the display.
2. Using the IGG SKIP buttons DDI (3) select the required album.
3. Press and hold the SKIP button IGG or DDI (3), until the first title on the album appears in the display.
Using the IGG SKIP buttons DDI (3) you can now select the required track.
4. Start playback of the track with the PLAY button (5).
Pressing the STOP button (4) whilst in search mode switches back into normal CD
mode.

ID3 Text Recall

Some MP3 files contain ID3 tag information, e.g. title, artist etc..
1. Begin playback of the MP3-CD.
2. Press and hold the FIND (30) button on the remote control for 2 seconds in order to set the device ID3
text mode. Where corresponding information is contained on the CD (e.g. title etc.), this will run across
the display.
3. Press and hold the FIND (30) button on the remote control for 2 seconds in order to return to standard
display mode (time, title number etc.).
46
Operating instructions
English