Explanation Of Symbols; Safety Instructions - Renkforce MS-11425 Bedienungsanleitung

Explanation of Symbols

The lightening symbol in a triangle indicates unprotected live components or elements
inside the housing or „live" connection points. Coming into contact with these compo-
nents or connection points may be fatal.
Cables connected to such connection points may only be connected by an expert or
you have to use ready to connect cables.
The device contains no parts that should be serviced by the user. Therefore, do not
open the device.
The exclamation mark symbol on the device indicates that the user should read these
operating instructions prior to using the product.
The "Hand" symbol indicates special tips and operating information.

Safety instructions

The warranty will lapse for damage due to non-compliance with these operating
instructions. We will not assume any responsibility for any consequential
damage.
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. Any warranty claim
will be invalid in such cases!
Dear customer, The safety instructions and danger warnings below are not only for the protec-
tion of the device but also to protect your well being. Please read carefully through the following
points:
For safety and licensing (CE) reasons, unauthorized conversion and/or modifications
to the product are not permitted.
The appliance has been constructed according to protection class II. As the source of
voltage only a correct mains socket (230V/50Hz) of the public supply system may be
used.
• Please make sure that you operate the device properly. Please follow the operating instructions care-
fully in doing so.
31