Cd Repeat Feature; Mp3-Cd Repeat Feature; Random Playback - Renkforce MS-11425 Bedienungsanleitung

Changing programmed playback order:
1. The device must first be in STOP mode.
2. Press the MEM (11) button in order to recall the saved playback sequence.
3. Press the MEM key (11) in order to select the individual playback positions.
4. MP3-CD: If the position is to be changed, press the IGG DOWN/REW or UP/FF buttons DDI (3) to
change the desired album Confirm your input with the MEM button (11).
5. Using the IGG DOWN/REW or UP/FF button DDI (3) select the desired title and confirm with the
MEM (11) button.
6. Start playback of the changed programme sequence by pressing the PLAY/PAUSE button (5).

CD Repeat Feature

1. Press the REPEAT (12) button during CD playback. The word „REPEAT 1" appears in the display. The
track currently played will be repeated continually.
2. Press the REPEAT (12) button again. The word „REPEAT ALL" appears in the display. The entire CD
will be repeated continually.
3. Pressing the REPEAT (12) button a third time ends the repeat function.

MP3-CD Repeat Feature

1. Press the REPEAT (12) button during MP3-CD playback. The word „REPEAT 1" appears in the dis-
play. The track currently played will be repeated continually.
2. Press the REPEAT (12) button again. The word „REPEAT ALL" appears in the display. The entire
MP3-CD will be repeated continually.
3. Press the REPEAT (12) button again. The word „REPEAT ALBUM" appears in the display. The current
album will be repeated continually.
4. Pressing the REPEAT (12) button a third time ends the repeat function.

Random Playback

1. Press the RANDOM (28) button to activate random playback. The word „RAND" appears in the dis-
play.
2. Press the RANDOM (28) button again to deactivate random playback.
The random function can only be activated on normal play sequence. Where a particu-
lar playback sequence has been programmed, the random function cannot be used.
44
Operating instructions
English