Faema E91 Ambassador A2 Handbuch Seite 35

English
8.3 Programming the milk distribution key
PROGRAMMING THE MILK DISTRIBUTION KEY (16)
To perform the programming of the milk dose follow the
procedure herebelow:
1) Insert the tube (18d) into the milk.
2) Place the cup by the cappuccino maker (18).
3) Press the milk distribution key (16) and keep it pressed.
4) When the quantity of milk in the cup has reached the
desired level, release the key (16).
8.4 Programming the cappuccino measures
PROGRAMMING THE CAPPUCCINO DISTRIBUTION KEY (C)
After entering the programming
cappuccino dosage programming menu, press and hold for
a few seconds the button (30) of the group on which the
cappuccino button is located. A buzzer will start making a
sound that is different from the normal machine programming
signal.
"Before programming the cappuccino dispensing
push buttons fill the filter holder with the correct
serving of ground coffee. Don't use coffee grouts
for programming servings."
Plunge the small pipe (18d) into the milk container.
Fit and tighten the filter holder (21) on the coffee dispenser
unit, positioning the cup under the nozzle of the filter holder
(21) and the cappuccino system (18).
You can now programme the cappuccino push button (C):
1) DISPENSING MILK BEFORE COFFEE
Press the milk distribution key (16) and keep it pressed. When
the quantity of milk in the cup has reached the desired level,
release the key (16): this programs the correct milk dose.
Once the programming of the milk serving has been
completed, press (and keep momentarily pressed) the
cappuccino dispensing push button (C) to program the coffee
serving. When the amount of coffee in the cup reaches the
required level, release the push button (C).
2) DISPENSING COFFEE BEFORE MILK
Press (and keep momentarily pressed) the cappuccino
dispensing push button (C) to program the coffee serving.
When the amount of coffee in the cup reaches the required
level, release the push button (C).
mode, to access the
C
21
Once the coffee dose has been programmed,
distribution key (16) and keep it pressed. When the quantity
of milk in the cup has reached the desired level, release the
key (16)
To exit the cappuccino dosage programming menu, press
the button (30) of the group on which the cappuccino button
is located. The buzzer will make the normal machine
programming sound.
49
English
16
18
18d
30 18 16
18d
press the milk