Symbol Explanation; Afety Instructions - VOLTCRAFT IR1000-50CAM Bedienungsanleitung

5.

syMBOl ExPlAnATIOn

An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The symbol can be found when you are to be given tips and information on operation.
6. sAfETy InsTRuCTIOns
We do not assume liability for resulting damages to property or personal injury if
the product has been abused in any way or damaged by improper use or failure
to observe these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating
instructions. Carefully read the whole operating instructions before operating the
device, otherwise there is risk of danger.
Dear Customer, the following safety instructions are intended not only for the protection of your
health but also for the protection of the device. Please read carefully through the following points:
Persons / Product
• The product is not a toy and should be kept out of reach of children and pets!
• On commercial premises, the accident prevention regulations of the Association of Industrial Professional
Associations with respect to electrical systems and operating equipment must be observed.
• In schools, training centres, Hobby and DIY workshops, the handling of measuring appliances
must be responsibly supervised by trained personnel.
• Be especially careful when dealing with voltages higher than 25 V AC or 35 V DC! Even at voltages
as low as these, there is a danger of fatal electric shock if you touch electric conductors.
• When used in conjunction with other devices, observe the operating instructions and safety
notices of connected devices.
• The product must not be subjected to heavy mechanical stress or intense vibration.
• The product must not be exposed to electromagnetic fields, extreme temperatures, direct sunlight or dampness.
• The device must not be exposed to humidity or liquids.
• Steam, dust, smoke and/or vapours can prevent accurate measurement by obstructing the
thermometer's optics.
• The product should not be used immediately after it has been brought from an area of cold
temperature to an area of warm temperature. Condensed water might destroy the product. Wait
until the product adapts to the new ambient temperature before use.
• If there is reason to believe that safe operation is no longer possible, put the device out of
operation and secure it against unintended operation. Safe operation is no longer possible if:
- the product shows visible damages,
- the product no longer works and
- the product was stored under unfavourable conditions for a long period of time,
- the product was subject to considerable transport stress.
• The manufacturer or supplier accepts no responsibility whatsoever for incorrect displays or the
consequences which can arise from such incorrect displays.
27