Usb Connection; Reset The Device; Tripod Mounting - VOLTCRAFT IR1000-50CAM Bedienungsanleitung

logs
1. Use the button photo / up arrow (5) and the button video / down arrow (3) to select the desired log.
2. Press the button ENTER (6) to show the selected log.
3. Use the button photo / up arrow (5) and the button video / down arrow (3) to scroll across the
x-axis of the chart.
4. Press the button ENTER (6) to delete the log, you will be asked to CONFIRM by pressing the
button photo / up arrow (5), or press the button video / down arrow (3) to cancel (NO).
17.

usB COnnECTIOn

The picture, video and log files can be extracted via USB.
1. Connect the mini-USB plug of the USB cable to the USB socket (11) of the device.
2. Connect the USB type A plug of the USB cable to a vacant USB port on your computer.
3. The device will be recognized as a mass storage device, then you can extract the files to your
computer.
18.

REsET THE dEVICE

If the device stalls, you can reset the device by using a pin to push the pin hole switch located between
the USB port and the K-Type socket.
19.

TRIPOd MOunTIng

Screw the tripod into the tripod socket on the bottom of the device in a clockwise direction to fasten it.
Unmount the tripod by screwing it in an anti-clockwise direction.
37