VOLTCRAFT IR-360 Bedienungsanleitung Seite 18

We do not accept liability for damage to property or injury
to persons caused by mishandling or non-compliance
with the safety instructions. In such cases the guarantee
will lapse.
The exclamation mark in the triangle indicates that the
information provided next to it is of particular importance
in the operating instructions. You should read the entire
operating instructions prior to operation.
This product has been CE-tested and meets the neces-
sary guidelines.
For safety and licensing reasons (CE), unauthorised conversion
and/or modification of the device is not permitted.
In order to ensure a safe operation of the device, it is imperative that
the safety instructions, warning notes and the chapter on "Intended
use" are observed.
Please note the following information before using the device:
- Avoid using the device in the vicinity of electrical welding devices,
induction heaters and other electromagnetic fields.
- After abrupt temperature changes, the device must be adapted to
the new ambient temperature for approx. 30 minutes to allow it to
stabilise.
- Do not expose the device to high temperatures for long periods of
time.
Avoid dusty and humid ambient conditions. After use, store the device
in the storage bag, in order to prevent the lens from becoming dirty.
Measuring instruments and accessories are not toys and are should
not be handled by children!
On commercial premises, the accident prevention regulations of the
relevant professional insurance association for electrical systems
and operating materials are to be observed.
17