Pp 45 Rc Fault Messages; Technical Data; Technical Data For Pp 45 - Maico PP 45 O Bedienungsanleitung

11.3 PP 45 RC fault messages

Red Fault
LED
Internal error in
control
Master-slave com-
munication
Internal sensor
defective (I2C)
External sensor
not reporting.
No communication
with the EnOcean
module (PP 45 EO)
The faults are not acknowledged. Acknowl-
edgement takes place automatically when
the fault is remedied.
Display
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly once
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly twice
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly three
times
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly four
times
Fault LED
in alternation:
lit up for extended
period and then
flashes briefly five
times
12 Technical data | UK

12 Technical data

12.1 Technical data for PP 45

External diameter
Wall sleeve max. length 500 or 800 mm
Wall thickness min.
max.
Air filter outside
Air filter inside
Air volume/unit
Protection class / degree
of protection
Sound pressure level,
at distance of 1 m
conditions without ob-
structions
(ventilation level 1 to 5)
Rated voltage/
power frequency
Volumetric flows for
ventilation levels
1, 2, 3, 4, 5
Power consumption
Permissible ducting
lengths
with wired
connection
Radio components:
Frequency range
(in acc. with
EN 300220-1)
"Wireless" operating
distances in the building
are dependant on the
building materials used:
●
DS 45 RC  PP 45 RC
●
PP 45 EO  PP 45 RC
●
PP 45 RC  PP 45 RC
● With PP 45 RC as
signal booster
DN 160
265 mm
490 / 790 mm
G3
G2
42 m³/h
IP 00 / 2
23 / 28 / 33 /
37 / 40 dB(A)
230 V
50/60 Hz
15 / 20 / 30 /
36 / 42 m³/h
1.2 / 1.7 / 2.1 /
2.8 / 3.5 W
From star point
max. 25 m per
ventilation unit
868.35 MHz
up to:
30 m
30 m
30 m
40 m
57