B) Laser - VOLTCRAFT IR 1201-50D Bedienungsanleitung

• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised use. Safe
operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the
product.
• Always observe the safety and operating instructions of any other devices which are connected to the
product.
• Do not use in the immediate proximity of strong magnetic or electromagnetic fields or transmission
aerials. These may distort the measurements.
• Water vapour, dust, smoke and/or vapours may impair the optical characteristics and lead to faulty
measurements!
• Always comply with the accident prevention regulations for electrical equipment when using the product
in commercial facilities.
• In schools, educational facilities, hobby and DIY workshops, measuring devices must be operated under
the responsible supervision of qualified personnel.
• Never switch the device on immediately after taking it from the cold into a warm environment. The
condensation generated may destroy the product. First allow the product to reach room temperature
before switching it on.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair centre.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.

b) Laser

• When operating the laser equipment, always make sure that the laser beam is directed so that no one
is in the projection area and that unintentionally reflected beams (e.g. from reflective objects) cannot be
directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes. Before
using the thermometer, familiarise yourself with the statutory regulations and instructions for operating
such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation can seriously
damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your head away from the
beam.
31