Fuse Replacement - VOLTCRAFT VC610BT Bedienungsanleitung

fuse replacement

Disconnect the product from the power source before opening the power
compartment.
Disconnect the measuring leads from the product before opening the power
compartment.
Never operate the meter when it is open. Danger to life!
Turn the two screws on top of the product from the position "CLOSE" to "OPEN" to unlock the power
compartment.
Push the lever on the fuse compartment cover to the right to open the fuse compartment.
Replace the broken fuse with a new one of the same type. See the chapter technical data.
Close the fuse compartment and turn the two screws on top of the product from the position "OPEN"
to "CLOSE" to lock the power compartment.
In addition to the fuses (for the measuring leads) in the fuse compartment, there is a mains fuse next
to the mains inlet (16).
Proceed as follows to replace the mains fuse:
1. Remove all the connection cables and the mains plug from the device.
2. Lever the mains fuse from the bracket using a suitable screwdriver.
53