Herunterladen Inhalt Inhalt Diese Seite drucken

Charging The Vehicle Battery; Charging The Transmitter Battery - Reely Rock Crawler Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Rock Crawler:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen



8. Charging the vehicle battery

Please note:
Delivery does not include a rechargeable battery pack. This must be ordered separately.
The rechargeable battery pack is empty on delivery and must be charged.
Before the rechargeable battery pack delivers its maximum power, several complete discharge and charge
cycles are necessary.
Always use the NiCD rechargeable battery pack until it is empty if possible, as recharging a "half-full"
rechargeable battery pack repeatedly can cause a so called memory effect. This means that the rechargeable
battery pack loses its capacity, it no longer releases all of its saved energy, drive time is decreased.
This effect is much slighter in rechargeable batteries with NiMH technology, and recharging partially
discharged rechargeable batteries is less problematic.
High-quality rechargeable battery packs not only have a higher capacity, which allows you to drive your
model vehicle much longer, but also deliver a higher output voltage for extreme situations. Thus there is
more power available to the motor and more torque as well.
If you are using several rechargeable battery packs or rechargeable batteries, purchasing a high-quality
charger may be worthwhile. They are normally also suitably for the fast charging of rechargeable batteries.
Rechargeable batteries heat up during charging/discharging (driving the vehicle). Wait until the rechargeable
batteries have reached room temperature before charging them. The same applies after the charging
procedure. Do not use the rechargeable battery in the vehicle until it has cooled down sufficiently after the
charging process.


9. Charging the Transmitter Battery

Batteries can be charged while in the transmitter using the charging socket (Fig 1, pos 4) To do this a corresponding
charger is necessary (not included in delivery), that can be set for 8 cells (9.6V); the middle contact of the charging
socket is plus/+.
Attention!
When you are connecting a charger, there must be no normal batteries in the transmitter - only rechargeable
batteries. Recharging normal batteries is not possible, risk of fire and explosion!
Don't use fast chargers! The charging current for rechargeable batteries must not exceed 200mA.
31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis