D) "Latency Vs Quality" Function; E) "Brightness" Function - Sygonix 1594378 Bedienungsanleitung

d) "Latency vs quality" function

Use this option to change the relationship between image lag/latency and image quality (depends on the compression
rate).
Selecting a higher image quality increases the image lag/delay.
• After selecting this option on the monitor/DVR, use the touchscreen (or the "
" " button (28) on the IR remote control) to select one of the three options.
• Touch the " " icon on the touchscreen, or press the "
go back to the previous menu.
Press the "
display.

e) "Brightness" function

Use this option to set the brightness of each camera.
• After selecting this option on the monitor/DVR, use the touchscreen (or the "
" " button (28) on the IR remote control) to select one of the four cameras.
• The selected camera will be displayed on the monitor/DVR.
• Use the touchscreen (or the arrow buttons ("
ness.
• Touch the " " symbol on the touchscreen, or press the "
go back to the previous menu.
Press the "
display.
84
" button (31) on the IR remote control to cancel the setting and go back to the previous
" button (31) on the IR remote control to cancel the setting and go back to the previous
" (28) on the IR remote control to save the settings and
" and " ") on the IR remote control) to select the desired bright-
" (28) on the IR remote control to save the settings and
" and " " arrow buttons and the
" and " " arrow buttons and the