Sygonix 1594378 Bedienungsanleitung Seite 92

The range is too short
• Point the monitor/DVR and wireless camera antenna in a different direction.
• Never point the antenna at each other, as this significantly reduces the range.
• For optimal results, the monitor/DVR and wireless camera antenna should be parallel to each other.
• Check that the wireless camera and monitor/DVR antenna are securely in place. Do not swap the antenna (the
monitor/DVR antenna is larger than the wireless camera antenna).
• Refer to section 20.
The recording is black and white.
• At night-time, the IR LEDs turn on and recordings are made in black and white.
There is no image on the LCD display.
• Switch on the monitor/DVR.
• The LCD display switched itself off to save power.
Motion detection does not function properly
• Motion detection works by detecting changes in the image content (see section 13b).
Advantages: Motion is always detected, regardless of the ambient temperature
Not affected by the temperature of the moving object
Disadvantages: May be triggered accidentally (e.g. by moving vegetation when the sensitivity setting is too high)
or by quick changes in brightness (e.g. sun/clouds)
This type of motion detection is different from devices that use a PIR sensor. PIR sensors react to a change in
temperature.
• Use a different sensitivity setting.
• Place the wireless camera in a different position.
• The objects in the detection range are moving too fast.
• Decrease the size of the surveillance range (see section 13b) to ensure that areas with trees, streets and other
moving objects are not monitored.
92