Adjusting The Telescopic Handle; Handle Adjustment; Working.safely - FLORABEST FHE 550 B2 Betriebsanleitung

• Check that you are standing safely
• Check your working surroundings
2..Switching.on:
• Connect the equipment to a power
supply with the supply voltage speci-
fied on the rating plate.
• Hold the equipment firmly in a relaxed
and safe manner. Operate starting
lock (11) and switch on the pruning
saw at on/off switch (10).
• The equipment will switch off again
when you release on/off switch (10).
• For safety reasons, a lockable continu-
ous operation setting is not possible.
Adjusting the Telescopic
Handle
The telescopic handle can be infinitely ad-
justed using quick release (15).
1. Push the lever forward as shown
in the illustration then push and
pull to adjust the handle length.
2. Pull back the lever and so fix the
desired working length of the
telescopic handle.

Handle Adjustment

1. Loosen pivotal centre (8) and
and fixing the adjustable han-
dle (9) on position.
2. Replace the pivotal centre (8) to
fixation.
Working Safely
• Observe the specified working angle
60°±10°, in order to guarantee safe
working.
• Do not use the high pruning saw
when standing on a ladder or in an
unsafe position.
• Do not be tempted to make unconsid-
ered cuts. Doing so may endanger
both yourself and others.
• Children must be supervised to ensure
that they do not play with the equip-
ment.
• Long use of the equipment can result
in vibration-related circulatory dis-
orders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.
GB IE CY
13