Setting Date And Time In Pir Mode - Conrad 596113 Bedienungsanleitung

g) Setting date and time in PIR mode
• The.camera's.time.setting.is.in.24.hour.format.
• Switch the TEST OFF CAM PSET switch to CAM position..The.display.shows."CAM".
• Push the M key once within 30 seconds to switch to the setting mode for program selection.
• "PIR".flashes.on.the.LC.display..Push.the.OK.key.to.confirm."PIR".
• Push the / .keys.until.the.menu.for.time.adjustment."T".(time).flashes..Push.the.OK key once
to.confirm."T"..
• The.minutes.flash.on.the.LC.display..Push.the.
increments of 1 minute. Push the OK.key.to.confirm.the.selection.
• The.hours.flash.on.the.LC.display..Push.the.
increments of 1 hour. Push the OK.key.to.confirm.the.selection.
• The.number.for.the.month.setting.flashes.on.the.LC.display..Push.the.
from 0 to 12. Push the OK.key.to.confirm.the.selection.
• The.number.for.the.day.setting.flashes.on.the.LC.display..Push.the.
from 0 to 31. Push the OK.key.to.confirm.the.selection.
• The.number.for.the.year.setting.flashes.on.the.LC.display..Push.the.
from 0 to 99. Push the OK.key.to.confirm.the.selection.
• The.LC.display.flashes."dEL"..Push.the.M key to leave the menu.
/ keys to select the minutes from 0 to 59 in
/ keys to select the hours from 0 to 23 in
/ keys to set the month
/ keys to set the days
/ keys to set the year
53