Quick Start Guide; Factory Settings; B) Preliminary Camera Settings - Conrad 596113 Bedienungsanleitung

9. Quick start guide

This.quick.start.guide.with.brief.instructions.gives.the.user.the.knowledge.necessary.to.set.the.product.
in.a.short.time..These.settings.must.be.remade.each.time.the.batteries.are.replaced..This.guide.does.
not.cover.all.the.product's.functions..When.changing.factory.settings.(except.date.and.time.settings),.
we recommend reading all corresponding segments included in this operating instructions.
a) Factory settings
Idle.time.(sleep):.30.seconds
Resolution:.3.MP
Video.mode:.10.seconds.(resolution.VGA)

b) Preliminary camera settings

1. Insert.4.pieces.1.5.V.type.C.batteries..Heed.correct.polarity.+/-.as.indicated.next.to.the.battery.
compartment.(11).
2. Insert an SD card into the SD card slot SD CARD.(23)..The.maximum.SD.card.memory.capacity.
can.be.32.GB.
3. Switch the TEST OFF CAM PSET.switch.(19).to.CAM to set the date and time.
4. "T".flashes.on.the.LC.display.(14).
5. Push the OK key to set the time.
6. Push the .(move.up)./.
to toggle to setting the hours.
7. Set the hours and push the OK.key.to.confirm.and.to.toggle.to.setting.the.date.
8. Set.the.month,.day.and.year.using.the.
to toggle to the next setting.
9. After.making.these.settings,."dEL".flashes.on.the.LC.display..This.stands.for."delete".and.allows.
you.to.format.your.SD.card..All.data.will.be.erased.from.the.card.if.you.format.it..Push.the.M key to
exit the settings menu if you do not wish to format your SD card. For more information on deleting
and.formatting,.see.chapter.12,.segment.e).
46
(move.down).keys.to.set.the.minutes..Push.the.OK.key.to.confirm.and.
keys. Push the OK.key.to.confirm.each.setting.and.
/
Time.lapse:.7:00.pm.-.7:00.am.(following.day)
Photo.burst:.3.images.
Operating.mode:.PIR.(motion.detector)