How to Use the DDS Auto Loader
16
Chapter 2 Operation
1
Load the desired number of cartridges (1, 7 or 8) into the magazine.
Refer to page 11. How to Insert the Cartridges.
2
To load the magazine, insert it into the slot in the front of the autoloader
in the direction of the large arrow. Apply steady pressure until the
mechanism pulls the magazine into the autoloader.
3
The TSL-9000 runs a rotation test automatically to check which
cartridges are loaded in the magazine, and whether they are inserted in
the correct direction.
It takes about 90 seconds to complete this rotation check. After completing
this check, the numbers "1" to "8" on the LCD should stop blinking and
stay on.