Interface Implementation; Supported Scsi Messages; Supported Scsi Commands - Sony TSL-9000 Bedienungsanleitung

Interface Implementation

Supported SCSI Messages

Abort
Bus Device Reset
Command Complete
Disconnect
Extended Message
-Synchronous Data Transfer Request
Identify (w/&w/o Disconnect)
Initiator Detected Error
Message Parity Error
Message Reject
No Operation
Restore Pointers
Save Data Pointer

Supported SCSI Commands

Erase
Initialize Element Status (LUN=1)
Inquiry (LUN= 0 or 1)
Load/Unload (LUN= 0 or 1)
Locate
Log Select
Log Sense
Mode Select (6)
Mode Sense (6) (LUN= 0 or 1)
Move Medium (LUN= 0 or 1)
Prevent Allow Medium Removal (LUN= 0 or 1)
Read
Read Block Limits
Read Buffer
Read Element Status (LUN= 0 or 1)
Read Position
Receive Diagnostic Results
Release Unit
Request Block Address
Request Sense
Reserve Unit
Rewind
Seek Block
Send Diagnostic (LUN= 0 or 1)
Space
Test Unit Ready (LUN= 0 or 1)
Verify
Write
Write Buffer
Write Filemarks
23
Chapter 2 Operation