Magazine
10
Chapter 1 Introduction
1
Stopper
Prevents loaded cartridges from slipping out of the magazine.
See page 11 and 13 for information on loading and removing cartridges.
2
Write-protect tab
Used to inhibit writes to data cartridges. Sliding this tab to the right
write-protects all data cartridges, whether or not write protection is set on
the individual data cartridges.
Caution:
The write protection status is determined by checking for the reflective plate
on the write-protect tab. In order to ensure correct determination of the status,
keep the plate reasonably clean, and never affix labels or the like over the
write protect tab.
2
1