Data Cartridge Selection - Sony TSL-9000 Bedienungsanleitung

Data Cartridge Selection

When 7 or 8 cartridges are loaded in the magazine
You can select data cartridges loaded into the magazine as necessary by using
the software on your computer.
Data cartridges can also be selected by using the SELECT button on the
drive.
When you press the SELECT button, the 7-segment indicator on the LCD
panel displays the number of the selected cartridge. (The number changes
sequentially each time you press the SELECT button.)
When a number has been displayed continuously for five seconds without
any other operation taking place, the data cartridge currently loaded in the
DDS drive is unloaded and the cartridge whose number is displayed is
automatically loaded.
When 1 cartridge is set in the magazine
When the magazine is inserted into the autoloader, the cartridge is
automatically loaded into the drive. When a cleaning cartridge is inserted, the
magazine is automatically ejected once cleaning is complete.
Cautions:
• After loading the magazine, about 90 seconds pass while the cartridges
inside the magazine are checked. During this time, the SELECT button does
not function.
• If the SELECT button is pressed while the BUSY indicator is flashing, the
current read or write operation is aborted and the cartridge is changed to the
next one in the specified selection sequence.
17
Chapter 2 Operation