Intended Use; Features; Scope Of Delivery; Technical Data - Parkside PBF 400 A1 Bedienungs- Und Sicherheitshinweise

Introduction
File belt sander PBF 400 A1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as descri-
bed and for the specified applications. If you pass
the product on to anyone else, please ensure that
you also pass on all the documentation with it.

Intended use

The band file is designed for filing, particularly hard
to reach areas, of wood, plastic, metal and filler, as
well as painted surfaces. Be sure to use different
grits for working on the different materials and to
also adjust the speed according to the material. The
device is not intended for commercial use. Any other
uses, and / or modifications to the tool are consid-
ered improper use and may result in serious hazards.
The manufacturer is not liable for any damages
caused by improper use.

Features

Speed control
1
Locking button
2
Handle
3
On / OFF switch
4
Dust bag
5
Side handle
6
Mounting and adjusting screw
7
Grinding frame, large
8
Clamping lever
9
Extraction adapter
10
Abrasive belt
11
Grinding frame, small
12
Grinding frame, angled
13
Spring
14
6 GB/IE
Front roller
15
Adapter connection
16

Scope of delivery

1 File belt sander PBF 400 A1
5 Abrasive belts for metal, wood, 8 x 455 mm
(2 x 60 grit, 2 x 80 grit, 1 x 120 grit)
5 Abrasive belts for metal, wood, 13 x 455 mm
(2 x 60 grit, 2 x 80 grit, 1 x 120 grit)
1 Dust bag
1 Extraction adapter (for external dust collection)
1 Straight frame, 8 mm
1 Straight frame, 13 mm
1 Angled frame, 13 mm
1 Carrying case
1 Set of instructions for use

Technical Data

File belt sander PBF 400 A1
Rated voltage: 230 V∼ 50 Hz
Rated power input: 400 W
Idle speed: n 2350–3600 rpm
0
Idle belt speed: 1070–1650 m / min
Abrasive belt: 8 x 455 mm and 13 x 455 mm
Protection class: II /
Noise and vibration data:
Measured sound value determined according to
En ISO 4871. The A-rated noise levels of the elec-
trical power tool are typically at:
Sound pressure level L
pA
Sound power level L
WA
Uncertainty K:
Wear ear protection!
The total vibration (vector sum of three directions) is
calculated in accordance with En 60745:
Vibration emission value: a
Uncertainty K = 1.5 m / s
: 82 dB(A)
: 93 dB(A)
3 dB
= 4.0 m / s
2
h
2