Juicing / Making Sorbet - Silvercrest SSJ 150 A2 Bedienungsanleitung

Juicing / making sorbet

WARNING! RISK OF INJURY!
► Never insert your fingers or other objects into the feed tube
appliance is operating. This could lead to serious injuries and/or damage
to the slow juicer.
CAUTION! MATERIAL DAMAGE!
► Do not operate the slow juicer for longer than 15 minutes (CO time) with-
out a break. After 15 minutes of continuous use, allow the slow juicer to
cool down. Otherwise the appliance could be damaged.
► Never operate the slow juicer without ingredients in the feed tube
Do not start the slow juicer until you have added ingredients to the feed
tube
1) Insert the plug of the power cable
NOTE
► If you want to move the on/off switch
position or back again, always start by moving the on/off switch
the "O" position (off) and wait until the motor has stopped.
2) Add a part of the ingredients into the feed tube
3) Place the appliance's On/Off switch
will begin working.
NOTE
► Normally, the appliance draws in the prepared ingredients automatically
when they have been placed in the feed tube
gently with the pusher
drawn into the appliance.
4) Add the more ingredients to the feed tube
to carefully press the ingredients into the feed tube
are being processed, add further pieces into the feed tube. Do not switch off
the appliance while processing.
TIP
► During operation, press only lightly with the pusher
appliance can block.
SSJ 150 A2
.
if you notice that the ingredients are not being
into the mains socket.
from the "I" position into the "R"
.
into the "I" position. The appliance
. Therefore, push only
. If required, use the pusher
. While the ingredients
, otherwise the
GB │ MT
while the
.
into
│ 43 ■