The appliance cannot be switched back on until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again:
–
Set the on/off switch
power cable
for 10–15 minutes.
–
Turn the housing lid
the marking on the sieve tray holder
–
Remove the housing lid
–
Remove the fruit or vegetable pieces causing the blockage.
–
Carefully remove the sieve tray
–
Press the "reset" button on the underside of the appliance base
–
Reassemble the appliance and resume juice extraction.
Assembling and operating the appliance
■
Before using the appliance for the first time, clean all component parts
thoroughly as described in the section "Cleaning and care".
■
Install the appliance in accordance with the safety instructions.
WARNING! RISK OF INJURY!
►
Ensure that the plug on the power cable
sembling the appliance.
SSJ 150 A2
to the "O" position and pull the plug on the
out of the socket. Allow the appliance to cool down
anticlockwise until the
.
and turn the appliance base
marking points towards
and clicks firmly into place.
is not in the socket before as-
GB │ MT
over.
:
│
39
■