Silvercrest SSJ 150 A2 Bedienungsanleitung Seite 44

1) Place the sieve tray
on the base
■ If you want to juice fruit/vegetables:
–
–
Place the sieve
at the top of the sieve
■ If you want to make sorbets:
–
Place the sorbet attachment
marking
marking on the sieve tray holder
is positioned in front of the outlet of the sieve tray
2) Place the transport screw
it down at the same time so that it clicks into place. Ensure that it is firmly
seated before continuing with the assembly.
3) Place the housing lid
housing lid
4) Turn the housing lid
marking on the sieve tray holder
5) Push the container for fruit pulp and vegetable mash
for fruit pulp and vegetable mash
NOTE
► When using the sorbet attachment
vegetable mash
6) Push the juice container
SSJ 150 A2
onto the appliance base
fit into the three slots on the underside of the sieve tray
Place the removable sieve frame
Turn the sieve frame
the gear on the inside at the bottom of the sieve tray
turns.
into the removable sieve frame
marking on the sieve tray holder
on the upper rim of the sorbet attachment
onto the sieve tray
points to the marking on the sieve tray holder
clockwise until the
is not required.
back and forth to see whether
points towards the
.
into the sieve tray
. The outlet of the sorbet attachment
onto the drive shaft
so that the
marking points towards the
and clicks firmly into place.
(see fig. A).
, the container for fruit pulp and
under the juice outlet
so that the three catches
.
into the sieve tray
so that marking
so that the
points to the
.
, turn it a little and press
marking on the
.
under the ooutlet
(see fig. A).
GB │ MT │ 41
.
■