Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Instruction Manual
We are pleased that you have chosen a walimex pro product by WALSER.
With the Walimex pro LED ring light Medow 960 Pro Bi Color you get a very powerful and richly
equipped ring light with the latest LED technology. This ring light convinces with highest light
quality and modern features including remote control, illuminated display, bi-color function and
two NP-F battery slots.
• Innovative and large LED ring light with powerful with 96 W power for up to 5.300 lumens
• Brightness dimmable 0 - 100 %, color temperature 3,200 – 5,500 Kelvin
• Highest light quality thanks to CRI of 95 Ra, flicker-free
• All functions remotely controllable with 6 groups and 50 channels
• Wireless operation with 2x Sony NP-F compatible battery slots
We hope you enjoy using our product.
Your team from WALSER!
■ P lease read these user instructions thoroughly before you use this new equipment for
the first time. It contains everything you need to know in order to avoid damage to per-
sons or property.
■ Strictly follow all notes on safety in these user instructions.
■ K eep these user instructions in a safe place. If you sell your equipment or pass it on to
someone else, you should also pass on these user instructions.
1.
Understanding these user instruction correctly
1.1 Markings on the device
This symbol indicates that your device meets the safety require-
ments of all applicable EU-directives.
Waste disposal and protection of the environment
Electric and electronic appliances as well as batteries must not be
disposed of together with domestic waste. The user is legally obli-
ged to return electric and electronic appliances as well as batteries to
specially set up public collecting points or to the sales outlet once the
appliance has reached the end of its service life. Details are regulated
by national law. The symbol on the product, in the user instructions or on
the packaging refers to these provisions. Recycling, material-sensitive
recycling, or any other form of recycling of waste equipment/batteries
is an important contribution to the protection of our environment.
24
1.2 Identifications in these user instructions
Identification
Meaning
Draws your attention to the dealing with and the effect of safety
information.
Draws your attention to a dangerous situation which can result in
WARNING
severe or even fatal injury if not avoided.
Draws your attention to possible property or equipment damage and
NOTICE
other important information in connection with your equipment.
Indicates a hazardous situation which, if not avoided, may result in
CAUTION
minor or moderate injury.
2.
Important safety information
WARNING
Danger of blinding and eye damage
The optical radiation of the LED lamp can blind the eyes and cause after-
vision, if humans or animals look directly at the light source. This can lead to accidents and
eye damage.
Make sure that humans or animals do not look directly into the illuminant
and keep a safe distance of at least 5 m, if necessary use diffusers between lamp and mo-
del or object. Do not use the lamp for illumination purposes when shooting small children or
babies.
WARNING
Danger of crashing, entrapment, burning and fire through the falling down of the
device
The weight of the flash is, depending on the model up to 3500 g.
■ Make sure, that the device is always positioned tilt and skid resistant and stored securely.
■ Make sure that all fastening screws have been properly tightened.
■ Keep out of reach of children and animal. They could overturn the device.
■ Avoid placing cables where they can be tripped over. The device could be overturned.
WARNING
Danger of electric shock, burn hazard
Please note, that the device is still connected with the supply voltage even if it is switched
off. Just after disconnecting the device from the power supply through pulling out the power
cable, the device is actually de-energized.
■ Switch off your device when it is not in use.
■ Switch off your device before mounting and maintenance and disconnect from power
supply.
■ Protect your device against unintended switching-on.
■ Unplug the power cord, if the flash is not in use for a long time.
25
Werbung
Inhaltsverzeichnis
