Operation; Select Operational Mode; Preselecting Rotational Speed; Switching On And Off - Parkside PBH 1500 B2 Originalbetriebsanleitung

Operation

Select operational mode

Hammer switch:
♦ Turn the hammer switch
symbol:
Hammer drilling = Hammer ON
Drilling = Hammer OFF
Function selector:
♦ Turn and hold the release button for the func-
tion selector switch
selector switch so that the required symbol
engages at the arrow mark.
Hammer drilling
Chiselling
NOTE
The following combinations are available:
Hammer OFF +
►
drilling
Hammer ON +
►
hammer drilling
Hammer ON +
►
Hammer OFF +
►

Preselecting rotational speed

You can use the rotational speed preselector ad-
justing wheel to preselect the rotational speed.
Stage 1 (low rotational speed) to stage 6 (high
rotational speed).
Work out the right setting with this practical test:
- Stage 3 – 6: high rotational speed: for hammer
drilling/chiselling in concrete or stone
- Stufe 1 – 3: low rotational speed: for drilling in
steel or wood
│
■ 14 GB
to the required
and rotate the function
hammer drilling =
hammer drilling =
chiselling = chiselling
chiselling = no function
Switching on and off
Switching the appliance on:
♦ Press the ON/OFF switch
Switching the appliance off:
♦ Release the ON/OFF switch

Maintenance and Cleaning

WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any
work.
■ The appliance must always be kept clean, dry
and free from oil or grease.
■ To clean the casing, use a soft dry cloth.
■ Clean the tool holder
♦ To do this, pull the locking sleeve
and pull the dust protector cap off the tool
holder .
♦ Before inserting the tool, lightly grease the tool
holder .
WARNING!
■ If the supply cord of this power tool is dam-
aged, it must be replaced by a specially
prepared cord available through the service
organization.

Disposal

The packaging is made from environmen-
tally-friendly material and can be disposed
of at your local recycling plant.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools are collected separately and
fed into an environmentally compatible recycling
process.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
.
.
regularly:
backwards
PBH 1500 B2