Introduction; Proper Use; Depicted Components; Package Contents - Parkside PBH 1500 B2 Originalbetriebsanleitung

HAMMER DRILL PBH 1500 B2

Introduction

Congratulations on the purchase of your
new appliance. You have selected a
high-quality product. The operating
instructions are part of this product. They contain
important information about safety, use and disposal.
Before using the product, familiarise yourself with
all operating and safety instructions. Use this product
only as described and only for the specified areas
of application. Please also pass these operating
instructions on to any future owner(s).

Proper use

The PBH 1500 B2 hammer drill (hereinafter
appliance) is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage of or modification to the appliance
is deemed to be improper usage and carries the
risk of serious personal injury.
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specified below.
The appliance is not meant for commercial use.

Depicted components

Function selector
Function selector release switch
On/off switch
Hammer switch
Rotational speed preselector adjusting wheel
Additional handle
Tool holder with dust protector cap
Locking collar
Wing screw
Depth stop
Wheel-rim chuck
Chuck key
│
■ 10 GB

Package contents

1 hammer drill PBH 1500 B2
1 additional handle
3 SDS-drill bits (8/10/12 x 150 mm) (see fig. B)
1 flat chisel (14 x 250 mm) (see fig. B)
1 pointed chisel (14 x 250 mm) (see fig. B)
1 metal depth stop
1 wheel-rim chuck for straight shank drill bits
(see fig. A)
1 chuck key (see fig. A)
1 carrying case
1 operating manual

Technical details

Nominal power:
Rated voltage:
Idle speed:
Hammer frequency:
Impact energy:
Drilling capacity:
Protection class:
Noise emission value:
Noise measurement determined in accordance
with EN 60745. The A-rated noise level of the
tool is typically:
Hammer drilling:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Chiselling:
Sound pressure level:
Uncertainty K:
Sound power level:
Uncertainty K:
Guaranteed sound power level
LWA in dB.
1500 W
230 - 240 V ∼ 50 Hz
(Alternating current)
n 0–750 rpm
0
0–3900 bpm
5 J
13 mm for steel
40 mm for wood
32 mm for concrete
II / (Double shielded)
L = 95 dB(A)
pA
3 dB(A)
L = 106 dB(A)
WA
3 dB(A)
L = 84 dB(A)
pA
3 dB(A)
L = 95 dB(A)
WA
3 dB(A)
PBH 1500 B2