FLORABEST FSG 85 B1 Betriebsanleitung Seite 36

GB
• Use.the.right.tool.
- Do not force small tools to do the
job of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use
circular saws to cut tree limbs or
logs.
Use of the power tool for operations dif-
ferent from those intended could result in
a hazardous situation.
• Dress.properly.
- Do not wear loose clothing or jewel-
lery, they can be caught in moving
parts.
- Non-skid footwear is recommended
when working outdoors.
- Wear protective hair covering to
contain long hair.
• Use.protective.equipment.
- Use safety glasses.
- Use face or dust mask if working
operations create dust.
• Connect.dust.extraction.equip-
ment..If the tool is provided for the
connection of dust extraction and col-
lecting equipment, ensure these are
connected and properly used.
• Do.not.abuse.the.cord..Never
yank the cord do disconnect it from the
socket. Keep the cord away from heat,
oil and sham edges.
• Secure.work..Where possible use
clamps or a vice to hold the work. It is
safer than using your hand.
• Do.not.overreach..Keep proper
footing and balance at all times.
This enables better control of the power
tool in unexpected situations.
• Maintain.tools.with.care.
.
Many accidents are caused by poorly
maintained power tools.
- Keep cutting tools sharp and clean
for better and safer performance.
36
- Follow instruction for lubricating
and changing accessories.
- Inspect tool cords periodically and if
damaged have them repaired by an
authorized service facility.
- Inspect extension cords periodically
and replace if damaged.
- Keep handles dry, clean and free
from oil and grease.
• Disconnect.tools..When not in use,
before servicing and when changing
accessories disconnect tools from the
power supply.
Such preventive safety measures reduce
the risk of starting the power tool acci-
dentaIly.
• Remove.adjusting.keys.and.
wrenches..Form the habit of check-
ing to see that keys and adjusting
wrenches are removed from the tool
before turning it on.
A wrench or a key left attached to a ro-
tating part of the power tool may result
in personal injury.
• Avoid.unintentional.starting..
Ensure switch is in "off" position when
plugging in.
• Use.outdoor.extension.leads..
When the tool is used outdoors, use
only extension cords intended for out-
door use and so marked.
• Stay.alert..Use common sense and
do not operate the tool when you are
tired. A moment of inattention white op-
erating power tools may result in serious
personal injury.
• Check.damaged.parts..This will
ensure that the safety of the power tool
is maintained.
- Before further use of tool, it should
be carefully checked to determine
that it will operate properly and per-
form its intended function.