Transportation, Storage; Transport; Storage; Installation Preparations - Maico EZD .. BL Serie Betriebsanleitung

5. Transportation, storage

5.1 Transport

Risk of damage to unit if
NOTICE
means of transport are
incorrectly attached.
Do not place load on sensitive
components, such as an impeller
or terminal box.
Danger to life during transport:
Unauthorised means of
transport or lifting gear may
DANGER
result in the unit falling off.
1. Weight:  note technical data
and centre of gravity (centre).
2. Observe the maximum permit-
ted loading capacity for lifting
gear and means of transport.
3. Do not stand under a
suspended load.
Risk of cuts from metal
housing plates with sharp
edges.
CAUTION
Wear protective gloves.
Notes
● Use suitable ropes or chains for transport.
● Only attach ropes or chains to the two eye
bolts [4].
● If possible, at the installation site use a
crane to position the unit on the roof.
● Maico accepts no indemnification or
warranty claims in the event of improper
transport.
5. Transportation, storage │ uk

5.2 Storage

● Only store fan horizontally in a suitable,
dry room: ambient temperature
- 10 to + 60 °C.
● Before installing, check that the motor
bearing is working properly.
● Maico accepts no liability for corrosion
damage caused by improper storage,
e. g. storage in a damp room.

6. Installation preparations

Risk of cuts from metal
housing plates with sharp
edges.
CAUTION
Wear protective gloves.
Notes
● Lay a permanent power cable to the
installation location.
● Always note the relevant specifications
for electrical installations and when fitting
equipment. In Germany observe DIN
VDE 0100 and the corresponding parts
in particular.
● Ensure the base frame is suitable and
level.
● Use suitable insulation, sound-deadening
and installation material between the unit
and roof socket.
● With a free inlet, fit a protective grille
(type SG) in front of the housing [7].
15