C) Changing A Tyre - Reely Core Bedienungsanleitung

c) Changing a tyre

Front axle Rear axle
The tyres are fixed to the wheel rims and cannot be removed. Therefore, if a tyre is worn, the entire wheel must be
replaced.
Undo the wheel nut (A) with a suitable crosshead screwdriver and remove the wheel from the wheel axle.
The wheel tappet nut (B) may be stuck in the wheel rim when you remove the wheel; remove it from the wheel rim
of the old wheel.
Replace the wheel tappet nut (B) on the wheel axle (C); the cross-shaped opening in the wheel tappet nut must point
in the direction of the wheel axle.
Then, position the new wheel and attach with the wheel bolt (A).
Do not apply any force when tightening the wheel nut as the wheel will then be difficult to turn, which can
damage the drive mechanism. In addition, the thread in the wheel axle may be damaged.
48