Yamaha PSR-7000 Bedienungsanleitung Seite 156

The DSP Effects & Parameters • DSP-Effekte und -Parameter • Effets et paramètres DSP
3. FEEDBACK LEVEL
Determines the amount of effect-sound feedback returned to the input of the effect stage. Higher negative or positive
values produce a more pronounced effect.
4. DELAY OFFSET
Varies the flanger delay time (the flanger effect is basically produced by modulating the delay time of one signal in relation
to another). Shorter delay times produce the greatest effect in the high-frequency range, while longer delay times extend
the effect to the middle and lower frequencies.
26. Symphon.
Symphonic is a broad, sweeping effect that adds a sense of scale to the sound.
1. LFO FREQUENCY
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced effect.
3. DELAY OFFSET
Varies the symphonic effect delay time (the Symphonic effect is basically produced by modulating the delay time of one
signal in relation to another). Shorter delay times produce the greatest effect in the high-frequency range, while longer
delay times extend the effect to the middle and lower frequencies.
27. Phaser
A traditional "phaser" effect, producing a gentle phase-shift sound that can be used to add extra animation to your
sound.
1. LFO FREQUENCY
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced effect.
3. PHASE SHIFT
Sets the phase difference between the left and right channel phaser signals. The larger the value, the greater the "spread"
in the sound. A setting of "0" produces a centered effect.
4. FEEDBACK LEVEL
Determines the amount of effect-sound feedback returned to the input of the effect stage. Higher negative or positive
values produce a more pronounced effect.
28. Rot.Sp.1 29. Rot.Sp.2
These effects simulate the swirling sound of the rotary speakers often used with electronic organs.
1. LFO FREQUENCY
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
2. LFO DEPTH
Sets the depth of modulation. Higher values produce deeper modulation and therefore a more pronounced effect.
33. Tremolo1 34. Tremolo2
Although "tremolo" effects, these effects also include a pitch-modulation depth parameter that can be used to add a
touch of vibrato.
1. LFO FREQUENCY
Sets the speed of LFO (Low Frequency Oscillator) modulation, and therefore the rate of effect variation.
154
Range: –63 ... 0 ... +63
Range: 0 ... 63
Range: 0 ... 127
Range: 0 ... 127
Range: 0 ... 63
Range: 0 ... 127
Range: 0 ... 127
Range: 0 ... 127
Range: –63 ... 0 ... +63
30. Rot.Sp.3
Range: 0 ... 127
Range: 0 ... 127
35. GtrTrem.
Range: 0 ... 127
31. Rot.Sp.4 32. Rot.Sp.5