Setting The Clock To Stamp The Recorded Time - Sony MZ-R35 Bedienungsanleitung

In stop mode
A
Elapsed time
Remaining time for
recording
Remaining time
after the current
location
2)
Current time
1)
Appears only if the track has been labeled.
2) Appears only when the clock is set.
To know the recording condition
The record indicator lights up or flashes
according to the recording condition.
Recording
condition
While recording
Recording standby
Less than 3
minutes' recording
time available
A track mark has
been added
z
If you want to check the playing position or
track name while playing, see page 19.
B
Track number
1)
Track name
Disc name 1)
2)
Current date
Record indicator
lights up
flashes according to
the loudness of the
source while
recording with a
microphone (voice
mirror)
flashes
flashes slowly
goes off
momentarily
Setting the clock to
stamp the recorded
time
To stamp the date and time on the MD
when you record, you first need to set the
clock.
=
CLOCK SET
(at the bottom)
1
Connect the power source.
Use the supplied AC power adaptor.
2
Press CLOCK SET at the bottom of
the recorder.
Use a pointed object.
The digits of the year flash.
AM
3
Change the current year by pressing
= or +.
To change the digits rapidly, keep
pressing = or +.
+
(
DATE
15
-EN