Troubleshooting; Hints In Disposal; Declaration Of Conformity - Klarstein 10030555 Bedienungsanleitung

Problem
The control panel is not
illuminated
The unit will not operate
The code E1 is shown in
the LED display
The code E2 is shown in
the LED display
The code E3 is shown in
the LED display
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household waste.
Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more de-
tailled information about recycling of this product, please contact your local council or your
household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)
31

Troubleshooting

Possibly Cause
No power
The pan is not located in the
appliance correctly
Just finished the Grill/Stir-fry
function in temperature over
100°C and want to change into
Steam/Stew function right away
The thermal sensor disconnected
or failed
The thermal sensor short circuit
The appliance over heated to 250
°C during dry heating
Hints on Disposal

Declaration of Conformity

Solutions
Make sure the appliance is plugged in.
Check your socket is switched on or try
another socket.
Ensure the pan is located correctly into
the position.
Stop the appliance to cool it first, then
restart
Contact your Service Support line for
assistance
Contact your Service Support line for
assistance
Unplug the appliance and let it cool
down, then can be resume