Troubleshooting - Klarstein Geysir 10033071 Bedienungsanleitung

TROUBLESHOOTING

Problem
Appliance does not heat
Temperature not
high enough.
Reset of the overheating
protection not
possible.
Possible cause and solution
• Check whether ON/OFF switch is in correct
position.
• Check whether the power plug is connected
properly to the mains.
• Check the power socket by connecting another
appliance for testing.
• Check if power cord and/or plug are
damaged. If damaged, do not use the
appliance!
• Check if the overheating/boil dry protection
has cut the power supply. If so, make a reset
of the fuse.
• Check if the temperature control knob is set to
the desired temperature.
• Check whether the appliance is scaled.
Decalcify the pot if necessary.
• Appliance is still too hot. Wait until possible
the appliance has cooled. Then try again to do
the reset.
EN
13