Troubleshooting - Kärcher RC 3000 Originalbetriebsanleitung

Indicator lamp displays:
Green Permanent light
Blinks slowly
Fast flashing
Red Fast flashing
Blinks slowly
Red Permanent light
Problem
Cleaning robot does not
find its way out of niches
between pieces of furniture
Gently rising furniture
Cleaning robot got stuck
underneath items of furni-
ture
Loose objects have been
taken up by the brush roller
and are now blocking the
brush
Cleaning robot comes to a
halt after charging/vacu-
uming process
28

Troubleshooting

Normal operating state
Cleaning robot is searching for the station
Batteries are charged
Cleaning robot is stuck
Cleaning robot is dirty
Contact authorised Customer Service!
Display Consequence
Red Cleaning robot
Fast comes to a halt.
Red Cleaning robot gets
Fast stuck and stops
Red Cleaning robot
Fast comes to a halt.
Red Cleaning robot
Slowly comes to a halt.
Red Dirt receptacle is full Empty and clean the dirt re-
Slowly
Red Brush roller is too
Slowly dirty
Red Brush roller is
Slowly blocked
Red Brush roller has not
Slowly been inserted cor-
rectly
Red Suction outlet of the
Slowly station is clogged
– 14
EN
Remedy
Move furniture if necessary.
Switch the cleaning robot
off and remove it from in be-
tween the furniture.
Place it back on the floor
and switch it on.
Turn off the cleaning robot
and remove it from the ob-
ject on which it got stuck.
Place it back on the floor
and switch it on.
Switch the cleaning robot
off and release it.
Place it back on the floor
and switch it on.
Switch the cleaning robot
off and turn it around.
Carefully remove the block-
ing objects; loose objects
include: Toys, clothes, ...
ceptacle.
Clean the brush roller.
Carefully remove blocking
objects from the brush roll-
er.
Check the seat of the brush
roller.
Check the suction outlet of
the station and clean it, if
necessary.