Technical Specifications; Station For Cleaning Robot; Cleaning Robot; Disposing Of Old Device And Battery Pack - Kärcher RC 3000 Originalbetriebsanleitung

Finish all maintenance work on the
cleaning robot with the following steps:
 Installing the dirt receptacle cover:
Illustration
Put the cover onto the dirt receptacle.
Illustration
27
Close both locking levers.
In addition, press on the front side of
the cover to ensure the dirt receptacle
is closed safely.
Exchanging the batteries
Illustration
28
 Release the two screws on the two bat-
teries, and remove the old batteries.
 Insert the new batteries, and fasten
them with the screws.
Spare battery pack (1 ea.):
Order number: 4.810-012.0

Technical specifications

Station for cleaning robot

Operating voltage
1~50 Hz
Cleaning power
Sound level (quiet mode) 60 (54) dB(A)
Filter bag volume
Dimensions
Weight

Cleaning robot

Battery voltage
Battery capacity
Battery type
Battery charge time
Cleaning duration per bat-
tery charge up to
Dirt receptacle volume
Dimensions
Weight
220 - 240 V
600 W
2 l
500 x 250 x
230 mm
5,8 kg
12 V
1,7 Ah
NiMH
10 - 20 min
60 min
0,2 l
ø 280 x 105
mm
2,0 kg
– 13
EN
Disposing of old device and
battery pack
The cleaning robot includes two built-in bat-
tery packs; please remove these before
disposing of the old appliance.
 Please arrange for the proper disposal
of the old appliance.
Remove battery pack and dispose
 Remove both battery packs of the
cleaning robot; see Chapter "Replace
batteries".
 Dispose of the batteries properly (at a
collection site or the dealer).
Danger!
Do not open the battery, as there is a risk
of an electrical short; also, irritating or
caustic vapors can escape.
Do not expose the battery to direct sun-
light, heat or fire, there is a risk of explo-
sion.
of
27