Error Messages; Weak Battery; Command Not Confirmed - HomeMatic HM-RC-Key3-B Bedienungsanleitung

the system. In order to reset the remote control, you
must use the configuration software of the center
for resetting!
The procedure is described in the software
instructions for the center.
9

Error messages

9.1 Weak battery

If the batteries are weak, the respective error code
(see Changing the batteries) is shown.
If the batteries are so weak that a reset is triggered
several times in a row without transmitting
successfully, no transmission will be made for
following button presses and the LED will only be
illuminated in red for 0.5 seconds.

9.2 Command not confirmed

If a receiver does not confirm a command (at
least one when more than one have been taught),
the device LED is illuminated in red when the
transmission is complete.
40