Note: If the remote control is already taught
for a center and therefore is blocked for
direct training, it can still be put in teach mode as
described above, the device LED is illuminated in
red for 2 seconds after pressing an operating button
however. Direct teaching is not possible!
Min. 2 sec. green LED
2 sec red LED
Orange flashing
Brief orange flashing
and 2 sec red or green
(depending upon
success)
Remote control in
configuration mode
and illuminated red
with button actuation
Teaching successful
Teaching failed
Only remote control in
teach mode
Other device in teach
mode and remote
control put in teach
mode.
Remote control already
taught for center and is
therefore blocked from
direct teaching
35