Device Led Feedback - HomeMatic HM-RC-Key3-B Bedienungsanleitung

HM-RC-Key3, HM-RC-Key3-B:
Operating the Keymatic. In factory status, the
remote control behaves like a button pair (see
above) and like an "ON" button.

7.2 Device LED feedback

The feedback signals apply for operation with and
without the center.
No actuators have been taught yet:
Brief press of the button: LED is illuminated in
orange for 1 second
Extended button press: LED is illuminated in orange
for 1 second
Button held down: LED is illuminated as long as the
button is pressed and goes dark afterward
Actuators are taught:
Brief/long press of the button: LED is illuminated
in orange as long as the function transfer requires,
this time depends on the number of actuators that
have been taught for this button, the number of
required transmission attempts and the encoding
and transmission mode. After the radio transmission
is complete, the LED is illuminated in either red or
37