Maintenance - PeakTech i665 Bedienungsanleitung

7. Maintenance

The removal of the rear case as well as maintenance and repair work must be performed by qualified
personnel.
Use only a soft, dry cloth to clean the housing. Never clean the housing with solvents or abrasive-
containing cleaning agents.
7.1. Replacing the battery
This meter is powered by a NEDA type 1604 or equivalent 9 V-battery. When the meter displays the
battery symbol
procedure to replacing the battery.
1. Disconnect test leads from any live source, turn the rotary switch to OFF and remove the test
leads from the input terminals.
2. The battery cover is secured to the bottom case by a screw. Using a screwdriver, remove the
screw from the battery cover and remove the battery cover.
3. Remove the battery and replace with a new equivalent 9 V-battery.
4. Replace the battery cover and reinstall the screw.
Note:
Batteries which are used up, dispose duly. Used up batteries are hazardous and must be given in the
for this being supposed collective container.
7.2. Notification about the Battery Regulation
The delivery of many devices includes batteries, which for example serve to operate the remote
control. There also could be batteries or accumulators built into the device itself. In connection with the
sale of these batteries or accumulators, we are obliged under the Battery Regulations to notify our
customers of the following:
Please dispose of old batteries at a council collection point or return them to a local shop at no cost.
The disposal in domestic refuse is strictly forbidden according to the Battery Regulations. You can
return used batteries obtained from us at no charge at the address on the last side in this manual or by
posting with sufficient stamps.
Contaminated batteries shall be marked with a symbol consisting of a crossed-out refuse bin and the
chemical symbol (Cd, Hg or Pb) of the heavy metal which is responsible for the classification as
pollutant:
1. "Cd" means cadmium.
2. "Hg" means mercury.
3. "Pb" stands for lead.
the battery must be replaced to maintain proper operation. Use the following
-41-