19.5.1 Parameter „adjustment to site
In the case of change to the settings in CFn 01 the settings in FNC 05 are
automatically overwritten, see chapter 10.5.
Call up function „CFn 01", see chapter 18.5.
Press the TARE-key, current setting appears.
Select desired settings with TARE or UNIT key.
Switch Automatic zero-adjusting switch on and off and select zero
Zero 0
range.
You can select 0 (switched off), 1d, 2d, 3d, 4d, 5d, 6d, 7d, 8d, 9d
Zero 9
Default setting: „0"
Confirm with TARE key, the current stability settings are indicated.
102
conditions"
(function „CFn 01")
KXS/KXG-TM-BA_IA-e-1621