Output Format (Function „Rs1 04") - KERN KXG-TM Etriebs- Und Installationsanleitung

12.4 Output format (function „rS1 04")
 Call up function "rS1 04", see chapter 12.
 Press the TARE-key, current setting appears.
 Select desired settings with TARE or UNIT key.
Comand
Data output via remote control commands
Stream
Continuous output
Auto Automatic issue of first stable weighing value
Sequence of operations:
1. Place weight, issue of first stable weighing value
2. Renewed output only possible after weight was removed.
3. Place next weight.
rS-off
Interface deactivated
M_Plus
Add-up mode
 Confirm with the TARE key, the display returns back to the menu.
 To go back into the weighing mode see chapter 12.
60 KXS/KXG-TM-BA_IA-e-1621