KERN KXG-TM Etriebs- Und Installationsanleitung Seite 181

RJ Hi /Lo/ OK status + display value without status
Example:
Hi/ Lo/ OK status
Lo (001)
OK (010)
Hi (100)
RK Hi/Lo/ OK status + gross weight without status (example see "RJ").
RL Rear one/ Lo/ OK status + net weight without status (example see "RJ").
RS Show tolerance limit
RS
: Class (00 ~ 99) *  : LO or HI
HI
LO
Example:
WS Set tolerance limit
WS XXXXXX
: Class (00 ~ 99) *  : LO or HI XXXXXX: Enter the limit value
HI
LO
Example:
####### Example:
1
*dependent on model
Should it be sent continuously, the command must be preceded by %.
If stable weight values are to be sent, the command must be preceded by #.
KXS/KXG-TM-BA_IA-e-1621
Sample display
001+ 2.000
010+ 3.000
100+ 4.000
Display of the adjusted upper limit value
Display adjusted lower limit value
Command RS02LO<CR><LF>
Response RS02LOXXXXXX<CR><LF>
Enter the value for the upper limit
Enter the value for the lower limit
Command WS00HI001000<CR><LF>
Response WS00HI001000<CR><LF>
Value
2 3 4 5 6
Position decimal point
1
Display
CR LF
69