KERN KXG-TM Etriebs- Und Installationsanleitung Seite 206

6. When „L3 1" is displayed, place the third adjustment weight carefully in the centre
of the weighing plate. Enter the desired factor, by which the following adjusting
weight is to increase, with the navigation keys.
Press the TARE key.
7. Repeat step 6 depending on the number of desired linearization points.
The number of desired points of linearization is completed by pressing the BG/
NET key.
 Confirm with the TARE key, the display returns back to the menu.
 To exit the menu / return back to the weighing mode, see chapter 18.1.1 and/or
18.1.2.
•
With the L0, L1 display, the linearization can be cancelled with the BG/
NET key.
•
With the L2, L3, L4, L5, L6, L7 or L8 display, the linearization can be
cancelled by pressing the BG/ NET key (e.g. L3 corresponds to a 3-point
linearization).
94 KXS/KXG-TM-BA_IA-e-1621