Service Menu - KERN KXG-TM Etriebs- Und Installationsanleitung

19 Service menu

Verified weighing systems:
• In verified weighing systems the access to the service menu is locked.
In order to unlock the access
and the housing opened. On the plate move the adjusting switch SWA1 to
position „ADJ". Switch on equipment,
LOCK
SWA1
ADJ
•
After the configuration, the access to the service menu must be locked again.
Also move the adjusting switch to the position „LOCK".
At the same time it leaves the service mode, the appliance returns to the
weighing mode.
•
Attention:
After destruction of the sealing the weighing system must be re-verified by an
authorised agency and a new sealing fitted before it can be reused for
applications subject to verification.
Unverified weighing systems
 With unverified weighing systems the housing does not have to be opened,
the access to the service menu is protected only by a password ("002011", not
changeable).
 Use the on/off key to switch on an appliance with pressed UNIT key.
 Press TARE button, „--------„ is displayed.
 With the navigation keys (see chapter 2.1.1) Enter password "002011".
At incorrect input the scale completes a self check and returns back into the
weighing mode.
 Confirm with TARE key. The first menu block
 With the navigation keys (see chapter 2.1.1) select desired menu block.
 To exit the menu
and on again with the ON/ OFF key.
80
, the sealing must be destroyed (see chapter 6.9)
/ return to the weighing mode, switch device off
is indicated.
is displayed.
KXS/KXG-TM-BA_IA-e-1621