Before Initial Use - Cleanmaxx SG 5008S-5 Gebrauchsanleitung

1. When you plug the mains plug into the plug socket, the operating lamp (4) lights up. The
device begins to heat up, and the temperature control lamp (15) lights up. As soon as
the set temperature is reached, this goes out. You can now iron.
2. As soon as you let go of the handle (16), the device automatically goes into stand-by
(automatic safety switch-off function) and the operating lamp fl ashes. CAUTION: It
takes a little while for the bottom of the iron to cool down. Even if the de-
vice is in stand-by, never leave it unattended while it is still connected to
the mains power!
3. If you touch the handle, the device switches on (automatic switch-on function) and the
operating lamp lights up constantly.
• The anti-drip system prevents water from dripping out of the bottom of the iron at low
temperatures.
• Thanks to the ceramic coating on the bottom of the iron (8) the device slides effortlessly
over the fabric during ironing.
• The anti-limescale system of the device removes the lime from the water if you use tap
water instead of distilled water for steam-ironing.
• The self-cleaning function (Self Clean button (12)) allows you to remove limescale residues
from the device, see the "Cleaning and Care" chapter.

Before Initial Use

CAUTION!
❐ Keep children and animals away from the packaging material. There is a danger of suffo-
cation!
• Unpack the items supplied and check them for completeness (see the "Items Supplied and
Device Overview" chapter) and transport damage. If the device does have any damage, do
not use it(!), but contact our customer service department.
• Before using the device, remove all paper bags, plastic bags, fi lms, cardboard and any labels
that may be on the device and are used for protection or advertising during transportation.
• It is essential that you read through the "Ironing Recommendations" chapter before you
fi rst use the device!
08298_DE-GB-FR-NL_A5_V3.indb 20
20
02.04.2013 14:04:36