Before Initial Use
ATTENTION!
■
Danger of suffocation from plastic fi lms and bags! Keep children and animals away
from the packaging material.
■
Water residues in the water reservoir are attributable to the fact that this device has
been tested and do not constitute a defect.
•
Unpack the items supplied and check them for completeness (see the "Items Sup-
plied and Device Overview" chapter) and possible transport damage. If the device,
plug or mains cable does have damage, do not use the device(!), but contact our
customer service department.
•
Before using the device, remove all packaging materials and any labels that may be
on the device and are used for protection during transportation or for advertising.
•
Before the iron is used on an item of clothing for the fi rst time, iron over a damp scrap
piece of fabric to remove any possible production residues from the bottom of the iron
(see the "Use" chapter).
•
It is essential that you read through the "Ironing Recommendations" chapter before
you fi rst use the device!
Ironing Recommendations
•
Check before ironing whether the garment which is to be ironed has a label with
ironing instructions on it and follow them. Otherwise choose the correct temperature
based on the type of fabric. The recommended temperature and steam settings are:
Label
Synthetics (e.g. nylon, viscose), silk, vel-
vet
Wool
Cotton
Linen
Not suitable for ironing
•
Delicate items of clothing should be ironed inside out.
•
Sort the items of clothing based on the ironing temperature and start with the gar-
ments which require the lowest temperature. If the temperature on the device is re-
duced, wait a few minutes until the bottom of the iron has cooled down slightly and
then continue ironing.
•
For an optimum ironing result, we recommend that you dry-iron the fabric after
steam-ironing it in order to remove the moisture from it.
19
Material
Tempera-
Steam
ture
up to •
No steam
••
•••
steam
•••
EN